Marshall electronic - BD-0114

Below are all the different types of Marshall electronic. Select the device of your choice, to download the manual

Contents

Marshall To operate unit insert the power plug Marshall V PS6 1 2A into the power jack located on the rear of the unit and twist the sleeve to lock the connector on The unit is automatically turned on when power is supplied to the unit and indicated by the power LED on the front of the unit Supply a NTSC PAL composite video signal to the video BNC con nector labeled VIDEO IN Installing the hard mount brackets Your BD 0114 comes with two brackets that allow the unit to be hard mounted to any surface with 4 screws By removing the middle screw on the enclosure position the bracket and then replace the screw After both brackets are installed place the unit in the desired location and mark the holes using a pencil Each unit comes with 4 self adhesive rubber ...